EN 1150:1999
Protective Clothing. Visibility Clothing for non-professional use
Non-professional use clothing is used in less demanding situations, so less assessment is demanded.

Colour Fastness
In order to maintain the conspicuity of a wearer the background fabric of a garment must not fade or lose colour. Consequently, the ability of a high-visibility garment fabric to withstand the effects of sunlight is assessed by exposing it to a Xenon arc lamp. Similarly, materials are assessed for colourfastness to agents such as a wash liquor or dry cleaning solvent.

Colour Measurement
Eight fluorescent colours are defined for use; ranging from a fluorescent green through to fluorescent pink. These colours are specified in terms of their colour co-ordinates and their luminance. The defined colours are assessed by spectrophotometer measurement; this is carried out under specific conditions, on both new material and Xenon arc exposed specimens.

Dimensional Stability
Standard EN ISO 13688: 2013, the general requirements for PPE clothing, assumes that garments will provide an adequate level of performance during their time in use. This includes a provision to assess the dimensional stability of materials to after-care treatments, such as domestic or industrial washing, and dry cleaning.

Tape Testing
The light reflective properties of tape are assessed using a photometer which measures the amount of light that is reflected back towards its point of origin. The instrument determines how light is reflected when garment tape is seen, effectively, at different distances and at different entrance angles. Retro-reflectivity is measured on both new and pre-treated materials.

Garment Assessment
The PPE Directive demands that materials used in PPE clothing are not harmful to a wearer. Therefore, a certain amount of chemical testing is required of high-visibility materials. Tests are usually conducted to determine whether substances that are prohibited from use are present, or whether substances that are present are there in limited amounts.

Chemistry Testing
The PPE Directive demands that materials used in PPE clothing are not harmful to a wearer. Therefore, a certain amount of chemical testing is required of high-visibility materials. Tests are usually conducted to determine whether substances that are prohibited from use are present, or whether substances that are present are there in limited amounts.